Tech Specs & Safety Information
Technical Specification
Hardware Specification
Processor type:
hardware Rev.5, Rev.4: Broadcom BCM2711 1.5 GHz quad-core Cortex-A72 (ARM v8) 64-bit
hardware Rev.3: Broadcom BCM2837 1.2 GHz quad-core ARM Cortex-A53 (64-bit)
Operational memory (RAM):
hardware Rev.5, Rev.4: 2GB LPDDR4
hardware Rev.3: 1GB LPDDR2 @ 900 MHz
eMMC storage
hardware Rev.5, Rev.4: 16GB
hardware Rev.3: 4GB
Network interface: Ethernet (1xRJ45): Gigabit Ethernet 10/100/1000 TX
1x HDMI port for debugging purposes
Other external ports: 4x DI, 4x DO, 1x 1Wire, 2x USB 2.0 (max. 300mA)
Digital Input/Output port types: DI type “pull-up resistor”. DO type “open collector”
RTC Clock: RTC 240B SRAM, Watchdog timer
Internal humidity & temperature sensor: Accuracy ± 0,5 °C, ±2 %RH
Power consumption:
hardware Rev.5, Rev.4: max 35W
hardware Rev.3: max 20W
Noise level: Fan-less
Dimensions: (width x depth x height) 45 x 120 x 101 mm
Weight: 350g
Casing: ABS, DIN rail installation
Operating parameters:
Operating temperature: 0 ~ 40°C
Humidity: 8 ~ 90% RH (no condensation)
2x Internal modem
Device type NXS-9750-4G Rev.5, Rev.4:
Wavebands: LTE, UMTS. Optional GSM.
LTE FDD: B1/B2/B3/B4/B5/B7/B8/B12/B13/B18/B19/B20/B25/B26/B28
LTE TDD: B38/B39/B40/B41
UMTS: B1/B2/B4/B5/B6/B8/B19
GSM: B2/B3/B5/B8 (optional)
Output power (Rated):
Class 3 (23dBm±2dB) for LTE-FDD, LTE-TDD bands
Class 3 (24dBm+1/-3dB) for WCDMA bands
Class 4 (33dBm±2dB) for GSM850, EGSM900
Class 1 (30dBm±2dB) for DCS1800, PCS1900
Class E2 (27dBm±3dB) for GSM850 8-PSK, EGSM900 8-PSK
Class E2 (26dBm±3dB) for DCS1800 8-PSK, PCS1900 8-PSK
Device type NXS-9750-4G Rev.3:
Waveband: UMTS, LTE
LTE Bands:
LTE FDD: 1-5, 7, 8, 12, 13, 17, 20, 25, 26, 28, 29, 30 (Rx only), 66
LTE TDD: 38, 40, 413G Bands: 1, 2, 4, 5, 8
Output power:
Class 3 (0.2 W, 23 dBm) @ LTE
Class 3 (0.25 W, 23 dBm) @ 3G
Device type NXS-9750-3G Rev.3:
Waveband: GSM, UMTS
GSM/GPRS quad-band 850/900/1800/1900 MHz
UMTS 800/850/900/AWS 1700/1900/2100 MHz
Output power (Rated):
E-GSM 900: Class 4, DCS 1800: Class1
EDGE 900: Class E2, EDGE 1800: Class E2
FDD I: Class 3, FDD VIII: Class 3
SIM card standard: mini
Antenna connector: SMA
Country of origin: European Union (Poland)
Power Supply
hardware Rev.5, Rev.4:
External power supply with output circuit rated ES1 (12Vdc; min, 3.3A), PS2 (LPS – Limited Power Source). AC line input:
Voltage ranges: 100–240V alternating current (AC)
Frequency: 50–60Hz single phase
DC plug type: 5.5/2.5
Alternative power source: PoE+ (IEEE 802.3at Type 2). Circuit provided with PoE+: rated ES1 (50-57Vdc; 30W), PS2 (LPS – Limited Power Source)
hardware Rev.3:
External power supply with output circuit rated ES1 (12Vdc; min, 1A), PS2 (LPS – Limited Power Source). AC line input:
Voltage ranges: 100–240V alternating current (AC)
Frequency: 50–60Hz single phase
DC plug type: 5.5/2.5
Antenna
Device type NXS-9750-4G:
2x Omnidirectional 2dBi antenna with magnetic foot
Waveband: UMTS, LTE
Cable length 3m
Plug type: SMA
Impedance: 50 Ohm
Device type NXS-9750-3G:
2x Omnidirectional 3dBi antenna with magnetic foot
Waveband: GSM, UMTS
Cable length 3m
Plug type: SMA
Impedance: 50 Ohm
Sending/Receiving Throughput
Incoming transmission rate: up to 60 SMS/min
Outgoing transmission rate: up to 60 SMS/min
Software Platform
Operating system: Linux
hardware Rev. 5: kernel 6.12
hardware Rev. 4: kernel 5.1x
hardware Rev. 3: kernel 4.14
built-in Apache2 web server
built-in PostgreSQL database server
built-in Postfix email server
built-in SNMP agent
built-in NTP-client
built-in Failover (HA-cluster) service
watchdog mechanism for 3G/4G/5G modem
modern responsive web interface
list of open TCP/UDP ports in default configuration:
TCP: 22 (SSH), 80 (HTTP), 443 (HTTPS), 5432 (Postgresql with access restriction to localhost only)
UDP: 68 (DHCP client), 323 (NTP client)
Important Safety Information
This chapter provides important information about safety procedures. For your safety and that of your equipment, follow these rules for handling your device.
Warning
Incorrect storage or use of your device may void the manufacturer’s warranty. Failure to follow these safety instructions could result in fire, electric shock, or other injury or damage.
Always take the following precautions.
Disconnect the power plug from AC power source or if any of the following conditions exist:
the power cord or plug becomes frayed or otherwise damaged
you spill something into the case
the device is exposed to rain or any other excess moisture
the device has been dropped or the case has been otherwise damaged
Be sure about that the use of this product is allowed in your country and in the environment required. As with any other telecommunication equipment, the use of this product may be dangerous and has to be avoided in the following areas: ď‚· where it can interfere with other electronic devices located in close proximity in environments such as hospitals, airports, aircrafts, etc.; where there is risk of explosion such as gasoline stations, oil refineries, etc.
It is responsibility of the user to enforce the country regulation and the specific environment regulation.
Do not disassemble the product; any mark of tampering will compromise the warranty validity.
Every device has to be equipped with a proper antenna with specific characteristics. The antenna has to be installed with care in order to avoid any interference with other electronic devices and has to be installed with the guarantee of a minimum 31cm (12.2 inches) distance from the body. In case of this requirement cannot be satisfied, the system integrator has to assess the final product against the SAR regulation.
DISCLAIMER: The manufacturer is not responsible for any damages caused by inappropriate installation, not maintaining the proper technical condition or using a product against its destination.